Witasek PflanzenSchutz GmbH – Your partner in plant protection

Spare rollers for Repellent Roller Tongs - for the application of water-soluble browsing repellents (e.g. WAM EXTRA pink)
shipping unit: 1 pair Information Repellent Roller Tongs:
With nylon rollers for the application of the repellent on terminal shoot. for water-soluble browsing and fraying repellents (all products available at witasek) ideally suited for water-soluble browsing repellents (e.g., WAM EXTRA pink) not suitable for the application of products containing tar or solvents Clean tool with water immediately after use.

Tool for the application of water-soluble browsing repellents (e.g. WAM EXTRA pink)
shipping unit: 1 piece with nylon rollers for the application of the repellent on terminal shoot for water-soluble browsing and fraying repellents (e.g. all products are available at witasek) Tool is not suitable for the application of products containing tar or solvents. Clean tool with water immediately after use.

Precision hollow cone nozzle with 1.1 mm nozzle orifice
shipping unit: 1 piece spray pattern: hollow cone (circular) spray angle: approx. 70° use: especially suitable for the application of WAM LIQUID and Fastac Forst All witasek-sprayers are standardly equipped with Hollow Cone Nozzle 1.1, which is also suitable for retrofitting other sprayers. e.g. suitable for use with Mesto PICO 3235 sprayer

Full cone nozzle with 0.5 mm nozzle orifice
shipping unit: 1 piece spray pattern: full cone spray angle: approx. 60° spray recommendation: optimal 2 bar use: for the application of Karate® Zeon and Certosan® e. g. suitable for use with Mesto PICO 3235 compression sprayer

Full cone nozzle with 3 mm nozzle orifice
shipping unit: 1 piece spray pattern: full cone spray angle: approx. 60° use: especially suited for the application of WAM LIQUID precision full cone nozzle TG 3 -  including body and union nut e. g. suitable for use with Mesto PICO 3235 compression sprayer

Designed to secure Univesal trap stand to the ground, best for soft and deep soil
shipping unit: 1 piece dimensions: 36 cm, Ø 8 mm installation: The small, screwable ground anchor is screwed into the ground in the middle of the Univesal trap stand. The ground anchor is then connected to the headpiece of the Univesal trap stand with the help of a cord.

Closed, square tree shelter as a bioproduct – perfect for deciduous woods
shipping unit: 100 pieces, includes 2 pieces of PLA adhesive tape and Cable Tie (100 pcs.)
- for better edge fixation, one roll of PLA adhesive tape with 66 running meters is included for every 50 pieces of BioWit Classic (DIN CERTO and TÜV AUSTRIA certified) protection height: 120 cm growing space diameter: approx. 14 cm Raw material is compostable in accordance with DIN EN 13432 high-quality with low space requirements for storage (delivered flat) quick to set up through a simple fastening system interior rod attachment, e.g. for acacia stakes 22 x 22 mm and alternative mounting holes, e.g. for cable ties shelter can be closed and re-opened and easy to re-use (e.g. for maintenance work) protection against damage caused by game and for mechanical weed control keeps weeds and tendrils out of growing space patented micro-ventilation – various ventilation holes can be pushed in at warmer locations to allow for climate control and improved ventilation. installation: talons: lower end, flaps: upper end to protect bark The scope of delivery includes PLA adhesive tape and ties for additional attachment or closure. (especially recommended for areas exposed to wind)colour: beige/natural – the natural beige color is achieved without the addition of artificial dyes  
Note on attachment: BioWit Classic tree shelters are constantly moved on open areas exposed to wind and are therefore subject to permanent mechanical stress.
Due to the lack of plasticizers and UV stabilizers, the material of the Biowit Classic has the disadvantage that it becomes brittle over time. The mechanical stress caused by wind causes the rod holder and also the locking tabs and ultimately the longitudinal edges to break.
For additional stabilization of the cover, a certified PLA adhesive tape is included, which is stuck around the cover - in two places (once in the upper third and once in the middle) - after the cover has been constructed and positioned over the plant. Furthermore, the cover should be attached to the plant stick with 2 cable ties. (see product images)

Natürlicher Pflanzenschutz für Haus & Garten
Pheromonfallen eignen sich hervorragend um Schadschmetterlinge in Ihrem Haus zu vermindern.

Inhalt: 1 Fallenset besteht aus:
- 2 Fallenkörper (WitaTrap® Delta Super Falle klein),
- 2 Leimböden (Separat verpackt!),
- 2 Pheromonstoppel (Separat verpackt!),
- 1 Aufhängedraht zur Montage und
- eine genaue Beschreibung.
Biologie des Schädlings
Schädling: Kleidermotte
Lateinischer Name: Tineola bisselliella
Vorkommen: Kleidung, Schränke und Kästen

Hauptsymptome:   
Löcher in Textilien Flugzeit der ersten Generation: Mai bis September
Anwendung:
Die Falle zusammenbauen und im Kleiderschrank bzw. in Räumen erhöht befestigen. Positionieren Sie die Falle hängend oder stehend in Räumen oder Schränken in denen Naturtextilien aufbewahrt werden. Die Falle reicht für einen Raum von bis zu 30 m².
Jede Falle sollte in regelmäßigen Abständen von 2-3 Tagen kontrolliert werden. Bei starkem Mottenfang den Leimboden bzw. die Falle erneuen.
Der Lockstoff bleibt ca. 4-6 Wochen aktiv und sollte danach ausgetauscht werden. Die Fallen sind vor dem Beginn des Falterfluges aufzuhängen.
Die Fallen sind vor dem Beginn des Falterfluges aufzuhängen.

Weitere Informationen zum Schadinsekt und zur Anwendung finden Sie in der beiliegenden Produktbeschreibung.

Fruit and Grape Protection Bags - Non-woven bags to protect crops from harmful insects, birds, and more.

shipping unit: 50 pcs. per pack dimensions: 20 x 30 cm Non-woven bags for protecting the harvest. Protects grapes, apples, and other fruits from bird damage and insects. colour: white

Fence posts and pasture posts made from acacia wood (Robinia pseudoacacia), naturally-grown
Sizes:
-  length 180 cm / Ø 8-10 cm
-  length 200 cm / Ø 8-10 cm
-  length 250 cm / Ø 8-10 cm naturally grown*
* The acacia stakes are naturally grown and the texture can be very different (possibly curved and different diameters). debarked pointed Durable without treatment - untreated wood, affordable, and no disposal costs. The acacia piles are suitable for fastening game fences. The acacia piles can deviate up to 25% of the specified dimensions. Forklift required when unloading acation piles with a length of 250 cm (can only be unloaded by the truck laterally) shipping unit 180 cm:
- pallet: 200 pcs.
- 1/2 truck: 2,300 pcs.
- 1 truck: 4,600 pcs. shipping unit 200 cm:
- pallet: 200 pcs.
- 1/2 truck: 2,000 pcs.
- 1 truck: 4,000 pcs. shipping unit 250 cm:
- pallet: 200 pcs.
- 1/2 truck: 1,600 pcs.
- 1 truck: 3,200 pcs.

Due to the high transport costs, smaller quantities than the specified minimum order quantity can only be picked up by the customer. We kindly ask you to contact us by phone on 0043 4276 3230.

Biowit Klimawit Light - Compostable mesh protection for your vines
The biologically-based protective tube is very finely meshed, which prevents the growth of weeds and tendrils in the growth space. The bioplastic is comparatively soft and needs to be fixed into place more securely.
shipping unit: 50 pieces (3,200 pcs./pallet) protection height: 60 cm mesh-size: ca. 2–3 x 2–3 mm growing space diameter: ca. 11 to 12 cm Raw material is compostable in accordance with DIN EN 13432 Vine protector tube with a very fine mesh made from biodegradable material. The close-meshed protective tube prevents weeds (e.g. blackberries) from growing in the growth space. This also ensures improved height growth. protection against damage caused by game – browsing protection and fraying protection no shoots can grow through the mesh Thanks to the biomaterial, the mesh is somewhat softer than the plastic version made from PE (polyethylene). UV-resistant colour: brown Also available on request as a tube roll of 100 linear meters for self-cutting - so you can easily determine the protection height yourself!

Biowit Klimawit Light - Compostable mesh protection for your plants
The close-meshed protective hose prevents weeds (e.g. blackberries) from growing in the growth space. This also ensures improved height growth.
shipping unit: 50 pieces protection height: 120 cm mesh size: approx. 2 to 3 x 2 to 3 mm growing space diameter: approx. 11 to 12 cm Raw material is compostable in accordance with DIN EN 13432 Protective hose with a very fine mesh made from biodegradable material Protection against damage caused by game – browsing protection and fraying protection no growing-out of side shoots through meshes Thanks to the biomaterial, the mesh is somewhat softer than the plastic version made from PE (polyethylene). use cable ties to secure protector UV stable colour: brown available as:
– ready-to-use, pre-cut pieces (1.20 m long)
– tube rolls of 25 linear metres or 100 linear metres which allow you to determine the desired length of the protector tube individually Practical tip: To ensure that the protective net maintains its square shape even better, the upper end can be turned over by approx. 5 cm. (see product images)

Fraying protection collar with a diameter of 6 cm and a height of 15 cm – specifically for conifers (e.g. larch, pine, Swiss pine)
The new fraying protection collar for protection against brushing damage can simply be attached between the stems and the lengths can be individually adjusted where necessary.
shipping unit: 200 pcs./bag Height of the collar: approx. 15 cm Easy to attach The protection stays rolled around the stem through its inherent tension Grows as the stem grows thicker The mesh design ensures perfect aeration. Can be cut to the required length with scissors or a knife as required Low weight therefore particularly suitable for young plants All protective measures can be regularly checked. Durability (UV-resistance): approx. 5 years Colour: black

MONO iron anti-fraying spiral with a diameter of 10-12 cm
especially for larch, pine, stone pine and hardwood
The protection spiral is either placed over the tree or rotated along the trunk. Alternatively, the spiral can only be attached to the outside. For this purpose it is fixed in the crown area and stretched down along the side of the trunk. The spiral pulls along with the height of the tree.
shipping unit: 50 pieces per pack protection heights: 120 cm acts on the game as a disturbing, mechanical barrier Protects the tree from fraying damage and completely decomposes after fulfilling its function. note: Check all protection measures regularly. colour: grey/metal

BioWit BTR - Sturdy tree protection for deciduous trees made from 100% FSC-certified cardboard (wood fiber)  - easy to open and close again.

shipping unit: 100 pcs. protection height: 120 cm growing space diameter: approx. 10 to 11 cmThe shelter consists of 100% FSC-certified wood fibres. The tree protection column is made of sturdy, multi-layer cardboard - that's increase stability. the column is easy to open and close again, therefore care measures are possible protects the trees from damage caused by game and weeds protects from direct sunlight, the vents ensure good ventilation and allow ample light to reach the plant. The white inner side reflects the sunlight directly to the plant. adapted hole size for even better light output for the plant suitable for deciduous protects plants from game damage and weeds simple use: delivered flat; folded and assembled with the usual folding clasp space-saving storage colour: brown Shelf life: approx. 1 year/plus*
*The case still provides protection after a year, although it is no longer completely visually perfect. It is not possible to give a service life for the BioWit® BTR product under outdoor conditions, as it is a natural material. BioWit® BTR is only suitable for use on deciduous woody plants 35-40 cm in size and upward.

BioWit BTR Tube - Sturdy tree protection for deciduous trees made from 100% FSC-certified cardboard (wood fiber), fix closed
The BioWit® BTR Tube consists of pre-cut pieces of two-tone cardboard (brown on the outside, white on the inside). The cardboard is 100% biologically degradable.
shipping unit: 50 pcs. protection height: 120 cm space diameter: approx. 12 to 13 cmThe shelter consists of 100% FSC-certified wood fibres Protects from direct sunlight, the perforation (punching) provides good ventilation and allows light to reach the plant, so the plant grows better and healthier. The white inside reflects sunlight directly to the plant. suitable for fast-growing deciduous tree species such as poplar etc. Protects your plants from animal damage and weeds Easy-to-use: No assembly required, as it is already bonded together. Insert the stem holder and slide it over the stem of your plant – done! (not openable) Space-saving storage colour: brown It is not possible to give a service life for the BioWit® BTR Tube product under outdoor conditions, as it is a natural material. BioWit® BTR Tube is only suitable for use on deciduous woody plants 35-40 cm in size and upward.

Untreated planting stake made of various coniferous woods - ideally suited as a marking stick for your forest plants

shipping unit: 25 pieces per bundle sizes:
- length 150 cm, 25 mm x 25 mm ideally suited as a marking stick for your forest plants
(Not suitable as a fastening rod for plant protection products due to their reduced durability. Please use acacia stakes here.) the tips of the stakes may vary due to production

WitaPlant MV Tube - completely closed tree protection cover
Promotes growth thanks to the microclimate inside the cover and the material's improved light transmission – Tests have shown that plants protected with WitaPlant® MV grow much better than unprotected ones!
shipping unit: 50 pieces protection heights: 120 cm Generous growing space diameter: approx. 14 cm greatly translucent double layer material provides for strong growth and healthy plant protection during mechanical weed control protection against damage caused by game – browsing protection and fraying protection patented micro-ventilation – various ventilation holes can be pushed in at warmer locations to allow for climate control and improved ventilation. installation: talons: lower end, flaps: upper end to protect bark Easy-to-use: No assembly required, as it is already bonded together. Insert the stem holder and slide it over the stem of your plant – done! durable (UV stable): approx. 4 to 5 years colour: transparent brown

Hose clamps with wing nuts for tool-free fastening for DIY, home and garden areas, as well as forestry and viticulture
The hose clamps with wing nuts can be used to attach a hose with a diameter of 16-32 mm without tools, for example be used on one end of the pipe. They offer a good grip and can be used in a variety of ways in DIY area, home and garden areas, forestry or viticulture.
Shipping unit: 1 set = 9 pieces (6x 16-25 mm and 3x 18-32 mm) Dimensions:
- Hose clamps with wing nut: 18-32 mm = 3 pcs.
- Hose clamp with wing nut: 16-25 mm = 6 pcs. Fastening without tools Material: Stainless steel with wing nut Color: silver

GroWit Standard - The planting tablet with water absorber and standard fertiliser donor

EC Declaration of conformity - CE 01 00.102.01
Our GroWit® plant tablets provide for improved growth rates and increased root development, making your plants more resistant to arid conditions.
Shipping unit:
- Bag of 250 pcs.
  (4 bags of 250 pieces per box = 1,000 pieces)
- Pack of 100 pcs.
- Pack of 20 pcs. Constituents: Hydrogel, osmo fertiliser, vermiculite, magnesium stearate One tablet can store up to 600 ml (0.6 litres) water!Superior fertiliser donor - Fertilizer is in coated form and provides targeted nutrients for up to 5-6 months. Can be used for bare root forest plants, Container plants, immature vines (when watering is not possible), potted vegetables, flowering plants, shrubsand and other plants Even in extreme soil temperatures, the plant tablets are stable for up to 5 years. Storage instructions: store dry and protected from moisture Application quantities and application instructions:
Bare root plants --> 1 to 3 GroWit planting tablets: Place tablet in the planting hole so that it is below the root on planting. Container plants -->1 GroWit planting tablet: Place one tablet per plant at the bottom of each planting hole. Pot plants from a pot size of 2 litres --> 1 to 2 GroWit planting tablets: In the case of pots with a capacity of 2 litres, place one tablet left and right next to the root ball. PLEASE NOTE: In order to become active in the soil, the tablet must receive water (rain, irrigation, watering, etc.). This allows it to swell, store moisture and release it back to the plant.

GroWit Natur - The planting tablet with water absorber and natural fertiliser

EC Declaration of conformity - CE 01 00.103.01
Our GroWit plant tablets provide for improved growth rates and increased root development, making your plants more resistant to arid conditions.
Shipping unit:
- Bag of 250 pcs.
  (4 bags of 250 pieces per box = 1,000 pieces)
- Pack of 100 pcs.
- Pack of 20 pcs. Constituents: Hydrogel, horn shavings, alginate, clay, guano, magnesium stearate One tablet can store up to 600 ml (0.6 litres) water!superior fertiliser donor Can be used for bare root forest plants, Container plants, immature vines (when watering is not possible), potted vegetables, flowering plants, shrubsand and other plants Even in extreme soil temperatures, the plant tablets are stable for up to 5 years. Storage instructions: store dry and protected from moisture Application quantities and application instructions:
Bare root plants --> 1 to 3 GroWit planting tablets: Place tablet in the planting hole so that it is below the root on planting. Container plants -->1 GroWit planting tablet: Place one tablet per plant at the bottom of each planting hole. Pot plants from a pot size of 2 litres --> 1 to 2 GroWit planting tablets: In the case of pots with a capacity of 2 litres, place one tablet left and right next to the root ball. PLEASE NOTE: In order to become active in the soil, the tablet must receive water (rain, irrigation, watering, etc.). This allows it to swell, store moisture and release it back to the plant.

GroWit Hydro - The planting tablet with water absorber

EC Declaration of conformity - CE 01 00.101.01
Our GroWit plant tablets provide for improved growth rates and increased root development, making your plants more resistant to arid conditions.
Shipping unit:
- Bag of 250 pcs.
  (4 bags of 250 pieces per box = 1,000 pieces)
- Pack of 100 pcs.
- Pack of 20 pcs. Constituents: Hydrogel, vermivulite, clay, magnesium stearate One tablet can store up to 600 ml (0.6 litres) water!superior fertiliser donor Can be used for bare root forest plants, Container plants, immature vines (when watering is not possible), potted vegetables, flowering plants, shrubsand and other plants Even in extreme soil temperatures, the plant tablets are stable for up to 5 years. Storage instructions: store dry and protected from moisture Application quantities and application instructions:
Bare root plants --> 1 to 3 GroWit planting tablets: Place tablet in the planting hole so that it is below the root on planting. Container plants -->1 GroWit planting tablet: Place one tablet per plant at the bottom of each planting hole. Pot plants from a pot size of 2 litres --> 1 to 2 GroWit planting tablets: In the case of pots with a capacity of 2 litres, place one tablet left and right next to the root ball. PLEASE NOTE: In order to become active in the soil, the tablet must receive water (rain, irrigation, watering, etc.). This allows it to swell, store moisture and release it back to the plant.

Natural-fiber twine (flax and hemp) for a variety of uses (e.g., gardening, household tasks, crafts, and much more)
Shipping unit: 1 roll of 30 m Thickness: 1mm Areas of application: for binding work in the garden, at home or for crafts Natural product Color: brown

WitaPlant MV 180 cm - The shelter for deciduous woods used a million times in green!
Promotes growth thanks to the microclimate inside the cover and the material's improved light transmission – Tests have shown that plants protected with WitaPlant® MV grow much better than unprotected ones!
shipping unit: 100 pieces protection heights: 180 cm Generous growing space diameter: approx. 14 cm greatly translucent double layer material provides for strong growth and healthy plant protection during mechanical weed control protection against damage caused by game – browsing protection and fraying protection shelter can be closed and re-opened and easy to re-use patented micro-ventilation – various ventilation holes can be pushed in at warmer locations to allow for climate control and improved ventilation. large growing space diameter: approx. 14 cm installation: flaps: upper end to protect bark durable (UV stable): approx. 4 to 5 years colour: transparent green

Akku-Astschere von VOLPI – Für den Hobby- und Profibereich im Obstbau, Weingarten, Forst, GALA-Bau
Die PV295 ist mit 2 Lithium-Ionen-Akkus mit einer maximalen Laufzeit von 3,5 Stunden pro Akku ausgestattet. Die Klingen sind austauschbar.
Die Backenöffnung kann so eingestellt werden, dass sie sich beim Schneiden kleiner Äste nicht vollständig öffnet. Die Batterien sind mit dem mitgelieferten Ladegerät wieder aufladbar. Es gibt ein Display mit Ladestandsanzeige.
Versandeinheit: 1 Stück
Lieferumfang: Elektronische Astschere, 2 Lithium-Ionen-Akkus, Ladegerät, Werkzeug zum Tauschen der Klingen, Benutzerhandbuch, Aufbewahrungskoffer Akkulaufzeit: ca. 3,5 Stunden Ladedauer: 2–3 Stunden Maximaler Zweigdurchmesser: 28 mm geliefert im praktischen Aufbewahrungskoffer mit 2 wiederaufladbaren Lithium-Ionen-Akkus schnelles Ausschalten und Stand-by-Funktion Display mit Gesamt- und Teilschnittzähler sowie Batterieanzeige austauschbare Klingen Nennleistung 150 W, Spannung 14,4 V Farbe: gelb/schwarz