Trap body for WitaPrall Cross-vane panel trap

Retrofit kit for WitaPrall Cross-vane panel Trap - new Capture Container for wet and dry trapping method for bark beetles, metallic wood-boring beetles and longhorn beetles such as pine sawyer beetles (Monochamus galloprovincialis), Asian longhorn beetles (Anoplophora glabripennis) shipping unit: 1 Capture Container, 1 adapter for WitaPrall IntPt Cross-vane panel traps with plastic hooks (for Capture Container)The pheromone is not included in the delivery! NEW - the Wita Universal Capture Container ist suitable for the wet and dry trapping mathod. easy to install and use   The Wita® Universal Capture Container for the WitaTrap® Multi Funnel Trap and Wita®Prall Cross-vane panel Trap.The Wita® Universal Capture Container is universally applicable and designed for the WitaTrap® Multi Funnel Trap and Wita®Prall Cross-vane panel Trap.Technical data:• Capacity: 1,000 ml before overflow• Material: PP (polypropylene)• UV-stabilisedDimensions:• Height: 270 cm• Diameter with bayonet ring: 102 mm• Weight incl. lid: 170 gUniversal applicationThe Wita® Universal Capture Container is designed for the WitaTrap® Multi Funnel Trap and Wita®Prall Cross-vane panel Trap, for wet and dry trapping. Bayonet lock with safety lockThe bayonet lock facilitates maintenance work and provides for an optimal hold of the Capture Container even in windy locations. BaseThree stable legs enable the bottle to be placed on the ground for maintenance work without tipping over. This facilitates maintenance work on the trap. Wet and dry trapping methodCambered stainless steel sieves on the outflow (at the bottom) and on both side overflows enable excess water to run off properly. The finely woven net structure prevents insects from escaping. The stainless-steel sieves are very durable and dimensionally stable.With the wet trapping method, overflow sieves provide for good drainage of excess rainwater. In addition, the  AntiSmell Catch Salt can be used to suppress the smell of the decomposing beetles in the trap. The outflow sieve at the bottom guarantees drainage of rainwater with the dry trapping method. Lid for wet trappingWith the wet trapping method, the lid is placed on the outflow on the bottom to seal it. The lid is additionally attached with a cord to the trap to prevent it from getting lost.

Universal Trap Stand for the WitaPrall Cross-vane panel trap and WitaTrap Multi Funnel Trap shipping unit: 1- Universal Trap Stand (high quality aluminium stand)- incl. pegs for an easy installation on the ground Universal trap stand for traps (e.g. multi funnel traps, cross-vane panel traps)The innovative trap stand enables easy installation of trap systems such as WitaTrap multi funnel trap, WitaPrall cross-vane panel trap and much more and ensures their secure hold. No additional, bulky construction materials have to be taken along or searched for at the installation site. Overall height approx. 2.80 m 3-part telescopic feet, continuously adjustable in height light weight easy to assemble - according to instructions high quality aluminum construction - height adjustable Uneven floors are easily compensated for by the telescopic rods. The pressed-in tips ensure the best grip in the ground. Includes pegs for attachment to the surface note other fastening options as described (drive in acacias on the feet) Traps attached to the Universal trap stand can be tied to the feet with a cord / thread. So the trap doesn't move in the wind.

The best trap-tub for mass trapping bark beetles (wet trapping) – complete, funnel not included shipping unit: 1 piece Originally designed for MulitWit Bark Beetle Slit Trap, but, however, can be used with all other slit trap types (e.g., Theysohn, Ridex, etc.) and funnels. Trap-tub can be used for catching all bark beetle species (e.g., European spruce bark beetle – Ips typographus, six-toothed spruce bark beetle – Pityogenes chalcographus, etc.) top quality material – durable for several years dimensions MultiWit Trap-Tub: height: 21 cm, width: 50 cm, depth: 8 cm NEW: all plastic strainers were replaced by steel strainers Wet trapping:Trapping systems with catch liquids have proven to be most effective when massive amounts of bark beetles have to be caught. These methods require the trap-tub to be filled with water and AntiSmell Trap Salt to achieve constantly high catch results. The following tips will allow you to increase catch numbers and save time and labour: No messenger substances: Bark beetles caught die very quickly in the water-saltsolution in the trap and, therefore, are no longer able to release messenger substances which could deter other beetles from approaching the trap. This ensures constantly high catch numbers and reduces the danger of an infestation of standing trees considerably. No smell of decaying beetles: Conventional trap systems do not suppress the smell of decaying beetles and, thus, the pheromones cannot have the desired attracting effect. This makes it necessary to check and empty dry trapping systems on ma weekly basis. When trapping systems with liquids are used (i.e. wet trapping), the water-salt-solution neutralises the smell of the decaying beetles and, thus, the attracting effect of the pheromones remains unaffected. As a consequence, catch rates constantly remain at a high level and no more than 2 to 5 trap checks per season, depending on flight intensity and flight duration, are necessary. Catch liquid concentration: A specially designed gutter featured in the MultiWit Bark Beetle Trap-Tub leads rainwater out of the trap so that the catch liquid keeps its effective concentration. When too much water enters the trap, an additional water drain in the middle of the tub draws off the excess water colour: transparent, allows easy trap checks to determine your catch success Dry trapping:Trapping systems without catch liquids are ideally suitable for monitoring bark beetle populations in their main flight periods. The transparent trap-tub facilitates weekly checks of traps and catch success, and the beetles caught can be easily counted. When the trap-tub is used for dry trapping, plug caps are removed from the drains of the MultiWit Bark Beetle Trap-Tub so that water can run off (i.e. conventional system). Depending on your needs, you can switch between monitoring (dry trapping) and mass trapping (wet trapping) during the flight period. Depending on your needs, you can switch between monitoring (dry trapping) and mass trapping (wet trapping) during the flight period .

Pheromone to attract european spruce bark beetle (Ips typographus), in proven dispenser foil packing, especially in spring IPSOWIT FJ (spring) acts as bait for the generation of beetles first swarming in the spring, at temperatures of 16 to 18 °C, usually from mid-April to the start of May. IPSOWIT FJ is characterised as being more attractive for the European spruce bark beetle in the spring. Increased catch rates can be achieved thanks to the newly-developed composition. shipping unit: pack of 5 pieces against insects on the spruce: European spruce bark beetle (Ips typographus) pheromone type: standard dispenser effective: 6 to 8 weeks* *depending on weather conditions Increases the important spring catch! Tip: Combination pheromone "Kombiwit Tube" - The pheromone has an attracting effect for the European spruce bark beetle (Ips typographus) and six-toothed spruce bark beetle (Pityogenes chalcographus) with long term effect.Read product informations before use! This is available below as a download: Handling of Pheromones WitasekStorage of pheromones: Store product in tightly closed original packaging (usually aluminium packaging), in a well-ventilated place, in a cool and dry place. Keep away from heat and ignition sources. Recommended storage: at minus temperatures e.g. in the freezer. Matching traps can be found under "Accessories articles" below.

Pheromone to attract Ambrosia beetles (Xylosandrus spp.) shipping unit: 1 piece against insects on many trees: Xylosandrus spp. is polyphagous on many trees, such as oak, beech, spruce and wine. Weakened trees and freshly felled trunks are preferred for infestation. The wood is discolored and devalued by the entry of ambrosia mushrooms. pheromone type: clear plastic bag with pheromone liquid in it Note: The pheromone consists of two attractant bags (A & B) that are packed separately. Both bags must be hung in the trap. The plastic bags are transparent and the pheromone liquid inside is visible.ATTENTION: The attractant bags must not be opened or damaged! effective: approx. 120 days**depending on weather conditions Read product informations before use! This is available below as a download: "Handling of Pheromones Witasek" Storage of pheromones: Store product in tightly closed original packaging (usually aluminium packaging), in a well-ventilated place, in a cool and dry place. Keep away from heat and ignition sources. Recommended storage: at minus temperatures e.g. in the freezer. Suitable traps can be found under "Accessories Articles" below.

To easily count the beetles caught Bark Beetle Measuring Cup is available in 2 sizes:- 100 ml- 250 ml shipping unit: 1 piece Catch number conversion: 1 ml of European spruce bark beetles equals approx. 40 beetles 1 ml of ambrosia beetles equals approx. 130 beetles 1 ml of six-toothed spruce bark beetles equals approx. 600 beetles