Klimawit HQ 220, protection height 120 cm, tree protector tube 120 cm, Ø approx. 13 cm

Especially resistant stake for the installation of tree shelters and much more shipping unit: 25 pieces per bundle sizes:- length 120 cm, 22 mm x 22 mm - also suitable to mark plants!- length 150 cm, 22 mm x 22 mm- length 150 cm, 25 mm x 25 mm - also very suitable for electric fences!- length 180 cm, 25 mm x 25 mm- length 200 cm, 25 mm x 25 mm highly durable: 15 years minimum! – therefore reusable and inexpensive durability achieved without impregnation – superbly environmentally friendly, inexpensive, no disposal costs for production reasons, the shape of the Acacia Stake tip may vary (see image). Note: Other hardwood species available upon request. (e.g. oak, beech and much more)

The BioWit cardboard mulch board is the natural/biological weed suppression as an alternative to chemical and mechanical weed control. The BioWit cardboard mulch board remains stable and cone-shaped on the floor and ensures that no weeds can grow up beneath it. When used on steep hillside locations, it is recommended to position the long side in a downhill direction. Weeds located above the slope cannot fall onto the plants. shipping unit: 100 pieces surface area: 60 cm x 40 cm 100% biodegradable material: cardboard evaporation protection can be used in combination with protective cover The central opening makes it possible to use a net product or a growth cover. (e.g. WitaPlant® MV, Wita®Econom, BioWit® Classic, etc.) can be locked by hand, no auxiliary equipment required stays stable and cone-shaped on the ground service life of several years

To attach tree shelters, tree protector tubes, fences, etc. to stakes shipping unit: pack of 100 pieces dimensions: 30 cm long, 4.8 mm wide can be fixed in any length up to the cable tie length of approx. 30 cm re-openable and reusable fixes the tree or vine shelters and tree or vine protector tubes optimally to the stake or rod UV stable

Rods for planting and marking, made of fiberglass in various sizes - triangular shape for more stability in the ground! Shipping unit: 100 pcs./bundle or 50 pcs./bundle Available in different sizes and colors Planting rod for securing tree and vine protection nets and covers The triangular cross section means that it is held in place more securely! Thanks to the shape and its elasticity, the Wita®Pro fibreglass rod moves in the wind with the plant. This ensures more stable root growth. For marking forest plants to make them easier to find for maintenance and to make sure they aren’t cut down. The three-winged shape provides a particularly good hold in the ground and makes sure that the rod doesn’t twist. Thanks to the unique new cross section, the fibreglass rod bundle is very stable during delivery and storage. (The flange doesn’t roll!) weather and moisture resistant smooth surface low weight broad display area top stability – even under all the stress from the mechanical weed control. long-lasting thanks to fibreglass – UV stable reusable Application / Installation: Gloves are to be worn during installation. For light soils, the rod can be pushed in by hand or driven in using a hammer. Using an impact sleeve is also an option.