Trap Body for Bark Beetle Slit Trap, excl. Trap-Tub

WitaTrap® Capture Container (Trap-Tub standard) without Funnel The standard trap-tub (excl. funnel) for dry trapping methods. (This must be ordered separately.) Dimensions WitaTrap capture container: height: 9 cm, width: 50 cm, depth: 8 cm New features: All plastic strainers were replaced by welded-in steel strainers. Furthermore, cambered strainers and the characteristics of the material they are made of facilitate a faster drainage of rain water.

Funnel for MultiWit Trap-Tub and WitaTrap Capture Container standard to be installed between trap body and trap-tub shipping unit: 1 piece The funnel prevents the captured bark beetles from escaping from the trab-tub again. to be installed between trap body and trap-tub colour: dark brown

The best trap-tub for mass trapping bark beetles (wet trapping) – complete, funnel not included shipping unit: 1 piece Originally designed for MulitWit Bark Beetle Slit Trap, but, however, can be used with all other slit trap types (e.g., Theysohn, Ridex, etc.) and funnels. Trap-tub can be used for catching all bark beetle species (e.g., European spruce bark beetle – Ips typographus, six-toothed spruce bark beetle – Pityogenes chalcographus, etc.) top quality material – durable for several years dimensions MultiWit Trap-Tub: height: 21 cm, width: 50 cm, depth: 8 cm NEW: all plastic strainers were replaced by steel strainers Wet trapping:Trapping systems with catch liquids have proven to be most effective when massive amounts of bark beetles have to be caught. These methods require the trap-tub to be filled with water and AntiSmell Trap Salt to achieve constantly high catch results. The following tips will allow you to increase catch numbers and save time and labour: No messenger substances: Bark beetles caught die very quickly in the water-saltsolution in the trap and, therefore, are no longer able to release messenger substances which could deter other beetles from approaching the trap. This ensures constantly high catch numbers and reduces the danger of an infestation of standing trees considerably. No smell of decaying beetles: Conventional trap systems do not suppress the smell of decaying beetles and, thus, the pheromones cannot have the desired attracting effect. This makes it necessary to check and empty dry trapping systems on ma weekly basis. When trapping systems with liquids are used (i.e. wet trapping), the water-salt-solution neutralises the smell of the decaying beetles and, thus, the attracting effect of the pheromones remains unaffected. As a consequence, catch rates constantly remain at a high level and no more than 2 to 5 trap checks per season, depending on flight intensity and flight duration, are necessary. Catch liquid concentration: A specially designed gutter featured in the MultiWit Bark Beetle Trap-Tub leads rainwater out of the trap so that the catch liquid keeps its effective concentration. When too much water enters the trap, an additional water drain in the middle of the tub draws off the excess water colour: transparent, allows easy trap checks to determine your catch success Dry trapping:Trapping systems without catch liquids are ideally suitable for monitoring bark beetle populations in their main flight periods. The transparent trap-tub facilitates weekly checks of traps and catch success, and the beetles caught can be easily counted. When the trap-tub is used for dry trapping, plug caps are removed from the drains of the MultiWit Bark Beetle Trap-Tub so that water can run off (i.e. conventional system). Depending on your needs, you can switch between monitoring (dry trapping) and mass trapping (wet trapping) during the flight period. Depending on your needs, you can switch between monitoring (dry trapping) and mass trapping (wet trapping) during the flight period .