WitaPro Fraying Protection Stake 150 cm
| Quantity | Price per piece |
|---|---|
| To 499 |
€2.27
|
| To 999 |
€1.97
-13,22 %
|
| From 1000 |
€1.79
-21,15 %
|
Available, delivery time: 7-10 Tage
Bulky goods are transported exclusively by carrier.
Product information "WitaPro Fraying Protection Stake 150 cm"
WitaPro Fegeschutzstab - Reliable protection against fraying damage – robust, sustainable, efficient
Optimal protection of young trees from damage caused by roe deer: The WitaPro Fraying Protection Stake combines a durable acacia stake with crescent-shaped wires that prevent roe deer from damaging their trees
- shipping unit: 25 pieces
- protection height: approx. 120 cm (acacia stake 150 cm)
Advantages of the Fraying Protection Stake:
- effective protection against fraying thanks to crescent-shaped, curved wires
- easy to deploy and install
- can be used on any plant size
- particularly suitable for conifers (e.g., Douglas fir, larch, pine)
Material & dimensions of the WitaPro fraying protection stake:
- Robinia wood (acacia) – untreated
- Dimensions of acacia stake: 1500 x 22 x 22 mm, pointed
- Wire: Weather-resistant and durable (up to 10 years)
Practical tip: In areas with high wildlife pressure, you should also apply a wildlife damage control product—such as "WAM Liquid" or "WAM Extra"—to the terminal shoot of the plant to protect it from browsing. Alternatively, you can use "WAM Browsing Protection Sleeves" or "Mono Browsing Protection Caps."
Login
Similar products
Fraying protection spiral 4 cm in diameter
For use in forestry and orchards – Protection spiral is installed through a screw-like motion around trunk.
shipping unit: 100 pieces per pack
protection heights: 75 cm, 90 cm or 120 cm
This protection spiral gives you a two-in-one advantage: It does not only protect from fraying damage but also from gnawing damage by mice and rabbits in the lower trunk section.
It grows in width with the trunk. Once the diameter of the spiral (4 cm) is exceeded, the protection length slowly decreases because of the increasing trunk diameter.
width of strips: approx. 8 cm
holes provide for good ventilation - The perforations ensure good ventilation and serve as a predetermined breaking point.durable (UV stable): approx. 7 to 10 yearscolour: green/transparent green
(Colours and appearance may vary)
note: Check all protection measures regularly.
Fraying protection collar with a diameter of 6 cm and a height of 15 cm – specifically for conifers (e.g. larch, pine, Swiss pine)
The new fraying protection collar for protection against brushing damage can simply be attached between the stems and the lengths can be individually adjusted where necessary.
shipping unit: 200 pcs./bag
Height of the collar: approx. 15 cm
Easy to attach
The protection stays rolled around the stem through its inherent tension
Grows as the stem grows thicker
The mesh design ensures perfect aeration.
Can be cut to the required length with scissors or a knife as required
Low weight therefore particularly suitable for young plants
All protective measures can be regularly checked.
Durability (UV-resistance): approx. 5 years
Colour: black
MONO iron anti-fraying spiral with a diameter of 10-12 cm
especially for larch, pine, stone pine and hardwood
The protection spiral is either placed over the tree or rotated along the trunk. Alternatively, the spiral can only be attached to the outside. For this purpose it is fixed in the crown area and stretched down along the side of the trunk. The spiral pulls along with the height of the tree.
shipping unit: 50 pieces per pack
protection heights: 120 cm
acts on the game as a disturbing, mechanical barrier
Protects the tree from fraying damage and completely decomposes after fulfilling its function.
note: Check all protection measures regularly.
colour: grey/metal